HomeAbout usNewsProductsCasesEquipmentOrderContact us中文版
Products
YZG/FZG Series vacuum Drier

Principle
橙子app看片 ※ It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying. If use vacuum to take air and humidity out, the dry speed will be faster

Application
※ It is suitable for drying heat sensitive materials that can decompose and polymerize and metamorphose at high temperature. It is wide used in pharmaceutical, chemical, foodstuff and electronic industries.

Technical parameters

Specification/name YZG-600 YZG-800 YZG-1000 YZG-1400 FZG-15
inside size of chamber(mm) φ600×976 φ800×1247 φ1000×1527 φ1400×2054 φ1500×1220×1400
cuter size of chamber(mm) 1135×810×1020 1700×1045×1335 1693×1190×1500 2386×1657×1920 2060×1513×1924
layers of baking shelf 4 4 6 8 8
layer of baking shelf(mm) 81 82 102 102 122
size of baking tray(mm) 310×600×45 460×640×45 460×640×45 460×640×45 460×640×45
number of baking tray 4 8 12 32 32
permitted pressureinside the pipe of baking shelf(Mpa) ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784
temperature inside chamber(℃) 35-150 35-150 35-1 50 35-150 35-150
vacuum in idle inside chamber(Mpa) -0.1 -0.1 0.1 0.1 -0 1
under the condition of -0.1Mpa and 110℃ evaporation rate of water, kg/m2hr. 7.2 7.2 7.2 7.2 7 2
when condenser is used.
model and power of vacuum pump(kw)
2X-15A
2KW
2X-30A
3KW
2X-30A
3KW
2X-70A
5.5KW
2X-70A
5.5KW
when condenser is not used.model and power of vacuum pump(kw) SZ-0.5
1.5kw
SZ-1
2.2KW
SZ-1
2.2KW
SZ-2
4KW
SZ-2
4KW
weight of frying chamber(kg) 250 600 800 1400 2100

 

Feature
※ Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a centain amount of heat radiation, he conducting area of evaporator can be saved.
※ The heat source for operation of evaporation may be low pressure steam or surplus heat steam.
※ The heat loss of evaporator is less.
※ Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixing. It is in conformity with the requirement of GMP.
※ It belongs to static drier. So the shape of raw material to be dried can not be destroyed.
※ If use condensate, the solvent in raw material can be recovered.

结构示意图

Home | About us | News | Products | Cases | Equipment | Order | Contact us | 中文版
Copyright(C)2017,  All Rights Reserved.
Supported by Copyright Notice